The SABBADIUS Black Gold is a very versatile analog Distortion pedal that goes from a
\nBooster passing through that sound so named lately as \u201cGlassy\u201d Tones to a warm Overd rive
\ngoing also through a soft Clipping Distortion to a HARD Distortion until reaching the sound of a
\nFuzz with a lot of Sustain .
\nThe SABBADIUS Black Gold \u201cVersatile Distortion\u201d is inspired by the famous ProCo RAT
\nand uses the OP07 or LM308 integrated circuit just like the old 80s and 90s version of the mentioned
\npedal. Although it is worth clarifying that the SABBADIUS Black Gold is not a copy of
\nthe RAT since they have some modifications made in the tone and Distortion control, thus
\nmaking this pedal even mo re versatile.
\nThe controls are 3:
\nVOLUME: Controls the Output Volume of the effect.
\nDRIVE: With this control you give the amount of Drive (Saturation) to the effect which makes it
\none of the main versatile characteristics of this pedal. From Min. To Max . You go through a lot
\nof sounds and colors changes, sustain and aggressiveness.
\nTONE: This control the tone of the effect that tints from the lowest and warmest tones to the
\nmost screeching and glassy tones that mixing with the DRIVE knob you can obtain incredible
\nresults.
\nIt is a 100% Handmade pedal in C\u00f3rdoba Argentina with 3PDT (True Bypass) mechanical
\nFootswitch
\nThis pedal can be powered with a 9 Volt battery which is housed behind the 3PDT between the
\nFootswitch and the back base plate where it says BAT. It can also be powered with a regulat ed
\nand stabilized 9 Volt-100mA (2.1mm NEGATIVE CENTER PIN) Like BOSS pedals.
\nDimensions:
\nLength: 120mm x Width 90mm (incl uding input and output Jacks)
\nHeight: 55mm (Including knobs and kickstands)
\nWeight: 380grs. Approx.
\nEnclosure Material: 100% Aluminum.<\/p>\n","protected":false},"excerpt":{"rendered":"
The SABBADIUS Black Gold is a very versatile analog Distortion pedal that goes from a Booster passing through that sound<\/p>\n